Should You Use Loctite On Cam Bolts. hey guys, which loctite should i use for the cam sprocket bolts? Some blocks have the head bolt holes drilled. Loctite won't stick to oil!!! loctite is used in areas where the fastener is subjected to extreme vibration and where access to the fastener is difficult. the instructions for my comp cams timing set says to use loctite on the cam bolts, if you aren't using a lock plate. the only thing i use loctite on is the cam gear bolts and the thrust plate bolts. more importantly, be sure you spray some brake cleaner on the cam threads and cam bolts to remove any oil. red is the high strength stuff and heat is often needed to break the bond. as long as the rpm are lower and you use clean thread holes and bolts, torquing to spec will hold them in place. I was going to use the red stuff since you don't want those. If you clean the threads with acetone or use the.
from ceqnhxfs.blob.core.windows.net
more importantly, be sure you spray some brake cleaner on the cam threads and cam bolts to remove any oil. the instructions for my comp cams timing set says to use loctite on the cam bolts, if you aren't using a lock plate. as long as the rpm are lower and you use clean thread holes and bolts, torquing to spec will hold them in place. Loctite won't stick to oil!!! red is the high strength stuff and heat is often needed to break the bond. If you clean the threads with acetone or use the. I was going to use the red stuff since you don't want those. hey guys, which loctite should i use for the cam sprocket bolts? Some blocks have the head bolt holes drilled. the only thing i use loctite on is the cam gear bolts and the thrust plate bolts.
Axle Bolts Loctite at Lynn Runnels blog
Should You Use Loctite On Cam Bolts as long as the rpm are lower and you use clean thread holes and bolts, torquing to spec will hold them in place. I was going to use the red stuff since you don't want those. red is the high strength stuff and heat is often needed to break the bond. loctite is used in areas where the fastener is subjected to extreme vibration and where access to the fastener is difficult. hey guys, which loctite should i use for the cam sprocket bolts? the instructions for my comp cams timing set says to use loctite on the cam bolts, if you aren't using a lock plate. Some blocks have the head bolt holes drilled. If you clean the threads with acetone or use the. the only thing i use loctite on is the cam gear bolts and the thrust plate bolts. more importantly, be sure you spray some brake cleaner on the cam threads and cam bolts to remove any oil. as long as the rpm are lower and you use clean thread holes and bolts, torquing to spec will hold them in place. Loctite won't stick to oil!!!
